I have solving a 2D oil water multi phase flow in a horizontal pipe having L=4m and D=0.026, It was mention that flow are flowing with a different mixture velocity ranges 1-3 m/s and different oil cut ranges 0.1-0.9. I solved it in fluent and I get a exact flow pattern and I take a vertical cross section in pipe outlet where I want plot below mention variables. My question is that (1) how I plot pressure gradient vs input oil fraction in fluent (2)How I plot pressure gradient vs water hold up in fluent please sir kindly look into this matter .I have in problem to solve it last 15 days.I did not solved it.Its urgent

# cfd post processing problem

- 378 Views
- Last Post 31 October 2017
- Topic Is Solved

Hello prantik10,

Which direction would you like to plot the pressure gradient? because you can plot with respect to a line or plane and you can create 1 plot for each input oil phase fraction scenario. You can do that in Fluent or CFD POST by exporting .cdat result files in the Automatic export window (Transient Case)

Cheers

Raef Kobeissi

I want to plot Pressure gradient in Y axis and input oil fraction in X axis.

I make a line along vertical direction at (X_{0}=4, Y_{0}=0 AND X_{1}=4,Y_{1}=0.026), then I go to XY plot section, I choose Y-axis as a pressure gradient(under derivative section i get pressure grad option) but in X -axis how I selected input oil fraction as a option???

For getting input oil fraction as a X-axis variable, I Used custom field function in fluent but I don't know what is the formula for it???

please sir kindly tell me the answer .

thank you so much for your previous reply.waiting for your reply.its urgent

##### Search

##### Categories

##### This Weeks High Earners

- peteroznewman 74
- KerolousR 22
- trayC 22
- raul.raghav 16
- maurya 11
- maliuzair 7
- morsan 6
- eufrat 6
- Raef.Kobeissi 5
- ssr46 4