Enable Parrelle Simulation in a Parametric Study

  • Last Post 22 November 2019
Sevencool posted this 19 November 2019


I am currently working on a parametric study in Workbench 19.0 and 19.2. After I update all the design points and make them run simulations, it is seems that the Workbench update the solutions of these design points one by one. In fact, there are 10 processer in my PC. Then how can I enable it to update several design points simultaneously? Could any one help on this please? 



Order By: Standard | Newest | Votes
Aniket posted this 20 November 2019

Please check the "Component Execution mode" in the properties of the parameter set.


Also note, you may need to have 10 licenses to run the 10 processes parallelly.


Guidelines on the Student Community

How to access ANSYS help links

Sevencool posted this 21 November 2019

Hi Aniket,

Thank you very much for the reply. 

Unfortunately, it seems that I have to select 'submit to remote solve manager' in the 'Update Option' to enable 'Component Execution Mode'. Currently, I would like to run it on my local PC. Would you think this is OK for my case? 

Many Thanks,


Aniket posted this 22 November 2019

I think you'll need  ANSYS Design Point Service (DPS)  https://ansyshelp.ansys.com/account/Secured?returnurl=/Views/Secured/corp/v195/dps_ug/dps_overview.html


RSM https://ansyshelp.ansys.com/account/Secured?returnurl=/Views/Secured/corp/v195/wb2_help/wb2h_usingrsmwb.html


You can configure RSM to local machine, but like I said before, you will need 10 licenses to run 10 design points simultaneously.


Guidelines on the Student Community

How to access ANSYS help links