Enhanced wall treatment

  • 137 Views
  • Last Post 29 October 2018
  • Topic Is Solved
sharm2a2 posted this 27 October 2018

Hello everyone, Do we need to consider y+ value if enhanced wall treatment is used? If yes,what is the range and if no, please explain.

Thank you Amit

kkanade posted this 29 October 2018

Yes, if you have good boundary layer mesh, then please use ewt. For this you may want to get y+ value between 1 to 5. 

ewt is used for near wall modeling. It is a two layer modeling with enhanced wall function. 

Please see help for further information. 

Regards,

Keyur

 

Also, please like the answers which have helped you move forward and in the end, once your issue is resolved, please mark the most appropriate solution (most useful advice) as 'Is Solution'. This will help others who are using this thread to find answers to similar questions.

  • Liked by
  • sharm2a2
Close