Error in HFSS-Circuit Dynamic Link Analysis

  • 180 Views
  • Last Post 08 January 2019
  • Topic Is Solved
Julia posted this 07 January 2019

Hello,

I am receiving the following error when I try to analyze a circuit with a dynamic link to an HFSS design. I would appreciate any advice regarding the origin of this error and if there is anything I can do to avoid it.

Thank you!

RFWireless_12212018_SweepSizeAndPosition_HumanAvg (/home/jeb113/Ansoft/)
  Circuit1
    [info] Nexxim simulation will use local parameter scoping. To change this option, please go to Tools>Options>General Options>Circuit Design (3:26:00 PM  Jan 07, 2019)
    [info] (info): Processing circuit for new analysis. (3:26:00 PM  Jan 07, 2019)
    [error] parser(error): /home/jeb113/Ansoft/RFWireless_12212018_SweepSizeAndPosition_HumanAvg.aedtresults/Circuit1/temp/DV40_S35_V56.cir:22: Unrecognized line type (not device or .card) (3:26:00 PM  Jan 07, 2019)
    [error] parser(error): /home/jeb113/Ansoft/RFWireless_12212018_SweepSizeAndPosition_HumanAvg.aedtresults/Circuit1/temp/DV40_S35_V56.cir:25: Unrecognized line type (not device or .card) (3:26:00 PM  Jan 07, 2019)
    [error] (error): Error found during loading: analysis aborted for /home/jeb113/Ansoft/RFWireless_12212018_SweepSizeAndPosition_HumanAvg.aedtresults/Circuit1/temp/DV40_S35_V56.cir (3:26:00 PM  Jan 07, 2019)
    [error] (error): Some or all simulation failed for /home/jeb113/Ansoft/RFWireless_12212018_SweepSizeAndPosition_HumanAvg.aedtresults/Circuit1/temp/DV40_S35_V56.cir. Total simulator time: 0:00:00 (3:26:00 PM  Jan 07, 2019)
 

Order By: Standard | Newest | Votes
Peter Serano posted this 08 January 2019

Hi Julia,

Try deleting the dynamically linked HFSS component from the Circuit Schematic, saving the model, and then re-drag and drop the HFSS model back into the Circuit Schematic. Re-run the circuit simulation again and see if the error has been resolved.

Best,

Peter Serano - Senior Application Engineer - High Frequency Products

Julia posted this 08 January 2019

That worked, thanks! 

Close