Error showing in fluent

  • Last Post 14 March 2019
  • Topic Is Solved
RajuMath posted this 14 March 2019

Hi all,

I was simulating my model for 2s. It was actually liquid splashing in a large converter (10m * 6.3m) using subsonic gas flow through a nozzle. I used k-e standard turbulence model, incompressible flow and VoF model. Initial turbulence kinetic energy was 0.001 and dissipation rate 100.

I have received 'turbulent viscosity limited to viscosity ratio of 1.000000e+05 in 1 cells' message after time step 19880 and "turbulent viscosity limited to viscosity ratio of 1.000000e+05 in 104652 cells"  after time step 107676. Then I have received the following messages. What could be reason behind of getting message?


Unable to parse: [free

Error: undefined read macro
Error Object: ()

Error: wta(2nd) to string_eq
Error Object: (1 cells)


How can I solve the turbulent viscosity ratio problem?

kkanade posted this 14 March 2019

there may be several reasons for this. 

make sure you have selected the correct sufficiently large domain. 

please make sure that you have a good quality mesh. the min orthogonal quality should be more than 0.1.

make sure you give correct inputs to the solver. 

  • Liked by
  • RajuMath