hexa mesh defeaturing

  • 117 Views
  • Last Post 21 February 2019
  • Topic Is Solved
Malik posted this 18 February 2019

https://drive.google.com/open?id=1H83Q3I0ErMlkGS7Dz_vg8obaH0qdfpUD

hello 
 attached above is the link for my given problem geometry and meshing. I have problem with the hexa meshing (at the point of bent, gerometry have 3 180 bent). 
i will be thankfull for the help.

 

Kind regards 
RAb Nawaz

Order By: Standard | Newest | Votes
peteroznewman posted this 19 February 2019

It meshes without error if you don't add the Multizone method, but this model would benefit from an inflation layer. Go into DM and create a plane at each edge and slice the body. Then select the 9 bodies and Form New Part to get Shared Topology working.

Now all the parts will be sweepable, which means you will get a hex mesh. You can Inflate this Method to add the inflation layer, and you can specify a smaller element size of 9 mm on the end face, and a larger default element size to use along the length.

Attached Files

Malik posted this 21 February 2019

Dear Peter,

 Thanks alot for your help.

kind regrads.
Malik

Close