how can I solve error in workbench>model

  • 93 Views
  • Last Post 2 weeks ago
zahraa posted this 4 weeks ago

Order By: Standard | Newest | Votes
zahraa posted this 4 weeks ago

hello

I have a problem in solving below error about design model>model please guide me. Thanks


                                                                          |
 | Database Requested(-db)  1024 MB    Scratch Memory Requested      1024 MB |
 | Maximum Database Used       5 MB    Maximum Scratch Memory Used     17 MB |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 |        CP Time      (sec) =          1.375       Time  =  22:24:28        |
 |        Elapsed Time (sec) =          5.000       Date  =  10/25/2019      |

 

An unknown error occurred during solution.  Check the Solver Output on the Solution Information object for possible causes. Project>Model>Static Structural>Solution Friday, October 25, 2019 11:09:14 PM

The license manager is delayed in its response. The latest requests were answered after 9 seconds. C:\Users\NP\Desktop\structural2_files\dp0\global\MECH\SYS.mechdb Friday, October 25, 2019 9:251 PM

 

peteroznewman posted this 4 weeks ago

Check the Solver Output on the Solution Information object for possible causes.

  • Liked by
  • zahraa
zahraa posted this 4 weeks ago

thank you but I don't know how to fix it

zahraa posted this 3 weeks ago

hello. Do you know my problem is about memory of my computer according to picture I have sent higher post? I unfortunately can't solve that 

peteroznewman posted this 3 weeks ago

There is no evidence that your problem is related to computer memory.  You need to use a text editor like Notepad to open the file solve.out in the Solver Files directory for that model and search for the word Error.  What does it say?  The word Error may appear more than once in the file.  Look at every instance.

zahraa posted this 3 weeks ago

I thought that was related to memory.Thank you so much for solving this issue. I don't know how should I use notepad ,do you have any tutorial file about that problem ?

again thank you 

peteroznewman posted this 3 weeks ago

You posted this in the AIM tutorials.  Are you using AIM or Workbench?

zahraa posted this 3 weeks ago

I have worked on workbench> model (mechanical)  and this error is in solution information in model 

zahraa posted this 3 weeks ago

I did this video step by step and import information in command eccording to this video but the high error stop me from continuing that please help Peterozenwman 

peteroznewman posted this 3 weeks ago

Open Mechanical, under the Solution branch is the Solution Information folder, click on that and by default, you should see the Solution Output, which is a screen full of text. That is the solve.out file.  You can use Ctrl-F to get a search field to type ERROR and find next.  Copy the text around that word and paste it into your reply. There may be more than one place that has the word ERROR.

zahraa posted this 3 weeks ago

ANSYS Mechanical Enterprise                      


 *------------------------------------------------------------------*
 |                                                                  |
 |   W E L C O M E   T O   T H E   A N S Y S (R)  P R O G R A M     |
 |                                                                  |
 *------------------------------------------------------------------*




 ***************************************************************
 *            ANSYS Release 18.2     LEGAL NOTICES             *
 ***************************************************************
 *                                                             *
 * Copyright 2017 SAS IP, Inc.  All rights reserved.           *
 * Unauthorized use, distribution or duplication is            *
 * prohibited.                                                 *
 *                                                             *
 * Ansys is a registered trademark of ANSYS, Inc. or its       *
 * subsidiaries in the United States or other countries.       *
 * See the ANSYS, Inc. online documentation or the ANSYS, Inc. *
 * documentation CD or online help for the complete Legal      *
 * Notice.                                                     *
 *                                                             *
 ***************************************************************
 *                                                             *
 * THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION       *
 * INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY      *
 * PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS.    *
 * The software products and documentation are furnished by    *
 * ANSYS, Inc. or its subsidiaries under a software license    *
 * agreement that contains provisions concerning               *
 * non-disclosure, copying, length and nature of use,          *
 * compliance with exporting laws, warranties, disclaimers,    *
 * limitations of liability, and remedies, and other           *
 * provisions.  The software products and documentation may be *
 * used, disclosed, transferred, or copied only in accordance  *
 * with the terms and conditions of that software license      *
 * agreement.                                                  *
 *                                                             *
 * ANSYS, Inc. is a UL registered                              *
 * ISO 9001:2008 company.                                      *
 *                                                             *
 ***************************************************************
 *                                                             *
 * This product is subject to U.S. laws governing export and   *
 * re-export.                                                  *
 *                                                             *
 * For U.S. Government users, except as specifically granted   *
 * by the ANSYS, Inc. software license agreement, the use,     *
 * duplication, or disclosure by the United States Government  *
 * is subject to restrictions stated in the ANSYS, Inc.        *
 * software license agreement and FAR 12.212 (for non-DOD      *
 * licenses).                                                  *
 *                                                             *
 ***************************************************************

 Release 18.2
    
 Point Releases and Patches installed:  
    
 ANSYS, Inc. Products Release 18.2  
 ANSYS Mechanical Products Release 18.2 
 ANSYS Autodyn Release 18.2 
 ANSYS LS-DYNA Release 18.2 
 ANSYS AIM Release 18.2 
 ANSYS CFX (includes ANSYS CFD-Post) Release 18.2
 ANSYS Fluent (includes ANSYS CFD-Post) Release 18.2
 ANSYS TurboGrid Release 18.2
 ANSYS FENSAP-ICE Release 18.2  
 ANSYS Polyflow (includes ANSYS CFD-Post) Release 18.2  
 ANSYS Forte Release 18.2
 ANSYS Chemkin Release 18.2 
 ANSYS ICEM CFD Release 18.2
 ANSYS Aqwa Release 18.2
 ANSYS Icepak (includes ANSYS CFD-Post) Release 18.2
 AutoCAD Release 18.2
 ACIS Release 18.2  
 Catia, Version 4 Release 18.2  
 Catia, Version 6 Release 18.2  
 Creo Elements/Direct Modeling Release 18.2 
 Inventor Release 18.2  
 JTOpen Release 18.2
 NX Release 18.2
 Parasolid Release 18.2 
 Creo Parametric Release 18.2
 Solid Edge Release 18.2
 SolidWorks Release 18.2
 ANSYS, Inc. License Manager Release 18.2


          *****  ANSYS COMMAND LINE ARGUMENTS  *****
  BATCH MODE REQUESTED (-b)    = NOLIST
  INPUT FILE COPY MODE (-c)    = COPY
  DISTRIBUTED MEMORY PARALLEL REQUESTED
       2 PARALLEL PROCESSES REQUESTED WITH SINGLE THREAD PER PROCESS
    TOTAL OF     2 CORES REQUESTED
  MPI OPTION                   = INTELMPI
  INPUT FILE NAME              = C:\Users\NP\Desktop\_ProjectScratch\ScrCE3E\dummy.dat
  OUTPUT FILE NAME             = C:\Users\NP\Desktop\_ProjectScratch\ScrCE3E\solve.out
  START-UP FILE MODE           = NOREAD
  STOP FILE MODE               = NOREAD

 RELEASE= Release 18.2         BUILD= 18.2      UP20170726   VERSION=WINDOWS x64
 CURRENT JOBNAME=file0  12:55:14  NOV 01, 2019 CP=      0.734


 PARAMETER _DS_PROGRESS =     999.0000000   

 /INPUT FILE= ds.dat  LINE=       0



 *** NOTE ***                            CP =       1.078   TIME= 12:55:17
 The /CONFIG,NOELDB command is not valid in a Distributed ANSYS         
 solution.  Command is ignored.                                         

 *GET  _WALLSTRT  FROM  ACTI  ITEM=TIME WALL  VALUE=  12.9213889   

 TITLE=
 structural2--Static Structural (A5)                                          


 SET PARAMETER DIMENSIONS ON  _WB_PROJECTSCRATCH_DIR
  TYPE=STRI  DIMENSIONS=      248        1        1

 PARAMETER _WB_PROJECTSCRATCH_DIR(1) = C:\Users\NP\Desktop\_ProjectScratch\ScrCE3E\

 SET PARAMETER DIMENSIONS ON  _WB_SOLVERFILES_DIR
  TYPE=STRI  DIMENSIONS=      248        1        1

 PARAMETER _WB_SOLVERFILES_DIR(1) = C:\Users\NP\Desktop\structural2_files\dp0\SYS\MECH\

 SET PARAMETER DIMENSIONS ON  _WB_USERFILES_DIR
  TYPE=STRI  DIMENSIONS=      248        1        1

 PARAMETER _WB_USERFILES_DIR(1) = C:\Users\NP\Desktop\structural2_files\user_files\
 --- Data in consistent NMM units. See Solving Units in the help system for more

 MPA UNITS SPECIFIED FOR INTERNAL   
  LENGTH      = MILLIMETERS (mm)
  MASS        = TONNE (Mg)
  TIME        = SECONDS (sec)
  TEMPERATURE = CELSIUS (C)
  TOFFSET     = 273.0
  FORCE       = NEWTON (N)
  HEAT        = MILLIJOULES (mJ)

 INPUT  UNITS ARE ALSO SET TO MPA

 *** ANSYS - ENGINEERING ANALYSIS SYSTEM  RELEASE Release 18.2     18.2     ***
 DISTRIBUTED ANSYS Mechanical Enterprise                      

 00000000  VERSION=WINDOWS x64   12:55:18  NOV 01, 2019 CP=      1.109

 structural2--Static Structural (A5)                                          



          ***** ANSYS ANALYSIS DEFINITION (PREP7) *****
 *********** Nodes for the whole assembly ***********
 *********** Elements for Body 1 "CONCRETE" ***********
 *********** Elements for Body 2 "Impactor" ***********
 *********** Elements for Body 3 "Line Body" ***********
 *********** Elements for Body 4 "Line Body" ***********
 *********** Elements for Body 5 "Line Body" ***********
 *********** Elements for Body 6 "Line Body" ***********
 *********** Send User Defined Coordinate System(s) ***********
 *********** Set Reference Temperature ***********
 *********** Send Materials ***********
 *********** Send Beam Properties ***********

 *** WARNING ***                         CP =       1.750   TIME= 12:55:22
 Poisson's ratio NU set for material 1 deleted.                         

 *** ERROR ***                           CP =       1.750   TIME= 12:55:22
 Material properties may only contain 100 data values.  The starting    
 position for material EX is 200000 which is outside this range.  The   
 MPDATA command is ignored.                                             


 NUMBER OF WARNING MESSAGES ENCOUNTERED=          1
 NUMBER OF ERROR   MESSAGES ENCOUNTERED=          1



 ***** PROBLEM TERMINATED BY INDICATED ERROR(S) OR BY END OF INPUT DATA *****

+--------- D I S T R I B U T E D   A N S Y S   S T A T I S T I C S ------------+

Release: Release 18.2       Build: 18.2       Update: UP20170726   Platform: WINDOWS x64
Date Run: 11/01/2019   Time: 12:55     Process ID: 1944
Operating System: Windows 10  (Build: 17763)

Processor Model: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz

Compiler: Intel(R) FORTRAN Compiler Version 15.0.7  (Build: 20160518)
          Intel(R) C/C++ Compiler Version 15.0.7  (Build: 20160518)
          Intel(R) Math Kernel Library Version 2017.0.2 Product Build 20170126

Number of machines requested            :    1
Total number of cores available         :    4
Number of physical cores available      :    2
Number of processes requested           :    2
Number of threads per process requested :    1
Total number of cores requested         :    2 (Distributed Memory Parallel)              
MPI Type: INTELMPI
MPI Version: Intel(R) MPI Library 5.1.3 for Windows* OS


GPU Acceleration: Not Requested

Job Name: file0
Input File: dummy.dat

  Core                Machine Name   Working Directory
 -----------------------------------------------------
     0                 NovinPendar   C:\Users\NP\Desktop\_ProjectScratch\ScrCE3E
     1                 NovinPendar   C:\Users\NP\Desktop\_ProjectScratch\ScrCE3E
 
Latency time from master to core     1 =    4.074 microseconds
 
Communication speed from master to core     1 =   861.12 MB/sec

Total CPU time for main thread                    :        1.6 seconds
Total CPU time summed for all threads             :        2.2 seconds

Elapsed time spent pre-processing model (/PREP7)  :        0.0 seconds
Elapsed time spent solution - preprocessing       :        0.0 seconds
Elapsed time spent computing solution             :        0.0 seconds
Elapsed time spent solution - postprocessing      :        0.0 seconds
Elapsed time spent post-processing model (/POST1) :        0.0 seconds
 

Maximum total memory used                         :       27.0 MB
Maximum total memory allocated                    :     3136.0 MB
Total physical memory available                   :          6 GB

+------ E N D   D I S T R I B U T E D   A N S Y S   S T A T I S T I C S -------+


 *---------------------------------------------------------------------------*
 |                                                                           |
 |                       DISTRIBUTED ANSYS RUN COMPLETED                     |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 | Ansys Release 18.2          Build 18.2         UP20170726     WINDOWS x64 |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 | Database Requested(-db)  1024 MB    Scratch Memory Requested      1024 MB |
 | Maximum Database Used       5 MB    Maximum Scratch Memory Used     17 MB |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 |        CP Time      (sec) =          2.219       Time  =  12:55:27        |
 |        Elapsed Time (sec) =         26.000       Date  =  11/01/2019      |
 |                                                                           |
 *---------------------------------------------------------------------------*

zahraa posted this 3 weeks ago

could you help me about this error ?thank you 

peteroznewman posted this 3 weeks ago

Here is the problem...


 *** ERROR ***                           CP =       1.750   TIME= 12:55:22
 Material properties may only contain 100 data values.  The starting    
 position for material EX is 200000 which is outside this range.  The   
 MPDATA command is ignored.   


Open Engineering Data from Workbench.

Check the Young's Modulus for all the materials used in the model. One of them is out-of-range.

zahraa posted this 3 weeks ago

could you help me in which part I should check the problem?thank you so much

peteroznewman posted this 3 weeks ago

What material did you use in your model?

The image in your post is of the toolbox.

You need to look to the right of that for the material. The image below is for the default Structural Steel.

zahraa posted this 3 weeks ago

I find that dear peteroznewman  and the young's modolus is correct 2e11 what should I do now? I am so sorry my question probably bother you but that is important thankss

zahraa posted this 2 weeks ago

hello, do you know how can I find  element midside nodes in advanced>mesh>model  I can\t find in ansys 18.2 

Thank you so much 

Close