How to Slice surface geometry in DM?

  • 184 Views
  • Last Post 29 October 2018
  • Topic Is Solved
vkumarsingh388@gmail.com posted this 23 October 2018

Hi,

I have generated a honeycomb structure using honeycomb creator in design modeller, but the geometry generated is bigger in size then i have requested for, so i have to slice it to required dimension but i don't know how to do it in DM, i have tried it but it doesn't result in anything.

I have made a plane at required distance and uses slice feature but nothing happened.

please help me.

Honeycomb core

Order By: Standard | Newest | Votes
kkanade posted this 23 October 2018

Hi,

Following video may help you. 

Also, please like the answers which have helped you move forward and in the end, once your issue is resolved, please mark the most appropriate solution (most useful advice) as 'Is Solution'. This will help others who are using this thread to find answers to similar questions.

 

Regards,

Keyur

  • Liked by
  • vkumarsingh388@gmail.com
kkanade posted this 24 October 2018

Is your issue resolved?

If so, can you mark it as resolved so that it will help others on forum.

Regards,

Keyur

vkumarsingh388@gmail.com posted this 27 October 2018

Hey, My bodies consist of surfaces because i have generated it by using honeycomb generator, and i have tried to remove the extra portion that i have get from creator, can you please suggest me how to remove remaining material.

peteroznewman posted this 27 October 2018

In DesignModeler, Slice will cut surface bodies.  You must create a New Plane that has the XY axis as the cut plane.

  • Liked by
  • vkumarsingh388@gmail.com
vkumarsingh388@gmail.com posted this 28 October 2018

Hello,

I have generated honeycomb structure using creator and I required structure length of 200 mm but the creator has generated structure of length 204.6 mm so, I have to make it 200 mm, for that I have created a plane at 4.6 mm from one side and try to slice it but nothing happens, can anyone please suggest me how to reduce it to required size.

Thanks you in advance.

 

kkanade posted this 29 October 2018

Please create a solid body out of surfaces. You can use Create - body operations - sew command. 

Then use slice operation. 

Regards,

Keyur

Close