How to use Arbitrary Lagrangian and Eulerian approach in ANSYS

  • 133 Views
  • Last Post 12 December 2018
Subhash N posted this 26 September 2018

I am trying to simulate the machining operation in ANSYS from the survey Arbitrary Lagrangian and Eulerian approach for meshing was appropriate for this simulation. so how can I incorporate that approach in my simulation model.

Order By: Standard | Newest | Votes
rwoolhou posted this 26 September 2018

Please can you explain in more detail, and add some images? 

kkanade posted this 26 September 2018

It would be good to have more explanation about 

what you are trying to do?

what is the process you are using?

what tools you are using?

Please insert images which would be more useful. 

Regards,

Keyur

Subhash N posted this 26 September 2018

I am trying to simulate a manufacturing process which is turning where the workpiece (steel) will be rotating and the tool(tungsten carbide) is stationary I wanted to model the temperature distribution in this process.

I am using Johnson cook material model for flow stress3D simulation3D simulation

Subhash N posted this 26 September 2018

I am trying to simulate a manufacturing process which is turning where the workpiece (steel) will be rotating and the tool(tungsten carbide) is stationary I wanted to model the temperature distribution in this process.

I am using Johnson cook material model for flow stress

Subhash N posted this 29 September 2018

Sir, what all the information you need? 

SandeepMedikonda posted this 29 September 2018

Hi Subhash,

  It looks like an Explicit Dynamics problem as we previously discussed. You can use the Euler domain (set Euler Reference in the geometry details) and change controls as needed in the Analysis settings. Check out this section from the manual for the theory behind it and the coupling?

Regards,
Sandeep
Best Practices to post on the Student Community

  • Liked by
  • samet KARABULUT
Subhash N posted this 01 October 2018

Sir,

Thank you for responding

I'm getting an error like energy error too large . What might be the cause of it How can I solve it.  

SandeepMedikonda posted this 01 October 2018

Subhash,

  Look at the energy conservation and energy summary in the output of your model. This might give you a better idea.

Regards,
Sandeep
Best Practices to post on the Student Community

Subhash N posted this 01 October 2018

Ok sir, 

Can you tell how to incorporate the effect of coolant in the same machining process. 

SandeepMedikonda posted this 01 October 2018

Hi Subhash, As far as I am aware you cannot model Thermal Conductance in Explicit Dynamics, you might have to use WB LS-DYNA.

Regards,
Sandeep
Best Practices to post on the Student Community

Subhash N posted this 02 October 2018

ok sir, Thank you

Anshu posted this 12 December 2018

Hello community

I want to simulate same problem in apdl .Please tell me how to define johnson cook model in apdl. 

Thanks in advanced

Close