I don't understand this error in IC Forte

  • 36 Views
  • Last Post 29 August 2018
Amrhossam96 posted this 27 August 2018

a screenshot for the error i get

"Solid Cone Injector should contain at least 1 Injection item"
As there apear on screen i have Three nozzles already but it keeps giving me that Error? what i'm missing if anyone could help i would really appreciate that

Order By: Standard | Newest | Votes
Kremella posted this 27 August 2018

Hello,

It seems to me like you have defined your injectors, but Forte does not know what you are injecting. Perhaps, you might have to assign what you are injecting here.

If you have not already looked, there are some tutorials on 'ANSYS HowTo' Youtube page. Here is a link.

I also found another tutorial which might be similar to what you are trying to do. I hope these videos help you figure out your issue.

Thank you.

Best Regards,

Karthik

lliang posted this 29 August 2018

The "Injection item" mentioned in the error message can be found at the top of the "Solid_Injector" panel. The icon is a clock plus a cone. You can click this "New Injection" icon to add an injection item for this solid cone injector. Each injection item specifies the injection timing, injection profile and total injected mass of an injection pulse. You can add more than one injection under the same injector to mimic split injection, which consists of multiple injection pulses. Hope this helps.

Best Regards,

Long  

Close