ICEM error when converting pre-mesh to unstruct mesh

  • Last Post 29 November 2017
  • Topic Is Solved posted this 29 November 2017

After generating structure mesh, when I try to convert pre-mesh to unstruct mesh, error occurs as shown in the picture. Can anyone help explain what might be the reason causing this problem? Thanks!


Order By: Standard | Newest | Votes
raul.raghav posted this 29 November 2017

As the pre-mesh to unstruct mesh is complete, ICEM-CFD should load a ".uns" mesh file. For some reason it is not able to locate the ".uns" mesh file. Does your ICEM-CFD have admin rights to write files in your working folder? If I were in your shoes, I'd try

1. Saving the ICEM project in a different folder and trying this process again, or

2. Run ICEM as administrator and see if that would fix the issue.

Good luck!

Rahul posted this 29 November 2017

Thank you Rahul for your help! It workes after I save the ICEM project in a different folder. I was trying to change the working directory, which did not make a difference. Thank you again for your help   -- Jianan