Importing Line and Solid Bodies from SpaceClaim to Mechanical

  • 718 Views
  • Last Post 27 January 2018
  • Topic Is Solved
peteroznewman posted this 20 October 2017

I successfully built a model with solid and line bodies using DesignModeler to study a helical gear mesh.

I started with a solid shaft that was split in quarters axially in DM to create vertex points along the shaft axis that lines were created on then line bodies were created with a circular cross section.

 

Solid and Line Body using DesignModeler

I'm trying to do a similar model starting in SpaceClaim. I imported spur gear solid bodies and created some lines in SCDM, but I don't know how to define those lines as line bodies with circular cross sections. 

solids and lines

I guessed that I should create New Components from the lines I drew. I guessed that I should add a Circle profile, which created this Beam object in the outline, but where do I enter the diameter of the circle?

Beam circle properties

Finally, when the time comes to import Geometry into Mechanical, I look at the Mixed Import Resolution property, and I can choose solids and surfaces or surfaces and lines. Don't I want solids and lines?  All attempts have only resulted in the solid bodies being imported into Mechanical.

Geometry properties

I have attached the ANSYS 18.2 SpaceClaim file in case someone can use it to answer my question.

Thanks in advance.

Attached Files

peteroznewman posted this 27 January 2018

I have since learned how to change lines into beams using SpaceClaim and created a Tutorial.

Close