Interfacing MATLAB with Workbench

  • 153 Views
  • Last Post 08 March 2019
Goddy posted this 28 February 2019

I am using workbench 19.1 and I am trying to do analysis which connect MATLAB to Workbench. There is no information out there about doing that anything available talks mostly about APDL. So my questions are:

 

 

  1. How do I really do it? Do i need to convert my model to APDL or is there a way to work directly with MATLAB and Workbench interactively
  2. Any help pointing me to the right direction will be appreciated. Because I'm a little confused now. I have installed the ansys aas toolbox and interfaced WB and matlab using the instructions but I don't really know how to do any analysis from there. So any video where an example on maybe a simple model where both MATLAB and workbench were interfaced and some analysis no matter how basic will greatly help.

Order By: Standard | Newest | Votes
SandeepMedikonda posted this 01 March 2019

Hi Goddy,

There is an example of utilizing an external solverThe external solver can be Matlab or other.

Regards,
Sandeep

Goddy posted this 04 March 2019

Hi Sandeep ,

Where can i find such an example? 

Thanks,

Goddy

shubhamiiserk posted this 06 March 2019

Hello Sandeep,

 

Is it possible to make an interface between additive print and python or Matlab.

 

Regards

Shubham Chaudhry

SandeepMedikonda posted this 08 March 2019

@Goddy,

I've hyperlinked it above. Here is a snapshot of that:

@Shubham, This is currently not possible. Please open a new discussion and use the #Permalink for future questions. Please take a moment to review the Guidelines.

Close