Interfacing MATLAB with Workbench

153 Views
Last Post 08 March 2019

Goddy posted this 28 February 2019 - Last edited 01 March 2019

I am using workbench 19.1 and I am trying to do analysis which connect MATLAB to Workbench. There is no information out there about doing that anything available talks mostly about APDL. So my questions are:

How do I really do it? Do i need to convert my model to APDL or is there a way to work directly with MATLAB and Workbench interactively
Any help pointing me to the right direction will be appreciated. Because I'm a little confused now. I have installed the ansys aas toolbox and interfaced WB and matlab using the instructions but I don't really know how to do any analysis from there. So any video where an example on maybe a simple model where both MATLAB and workbench were interfaced and some analysis no matter how basic will greatly help.

#Permalink
0
0
0

4 Comments

Order By: Standard | Newest | Votes

ANSYS

SandeepMedikonda posted this 01 March 2019

Hi Goddy,

There is an example of utilizing an external solver. The external solver can be Matlab or other.

Regards,
Sandeep

#Permalink
0
0
0

Goddy posted this 04 March 2019

Hi Sandeep ,

Where can i find such an example?

Thanks,

Goddy

#Permalink
0
0
0

shubhamiiserk posted this 06 March 2019

Hello Sandeep,

Is it possible to make an interface between additive print and python or Matlab.

Regards

Shubham Chaudhry

#Permalink
0
0
0

ANSYS

SandeepMedikonda posted this 08 March 2019 - Last edited 08 March 2019

@Goddy,

I've hyperlinked it above. Here is a snapshot of that:

@Shubham, This is currently not possible. Please open a new discussion and use the #Permalink for future questions. Please take a moment to review the Guidelines.