Simulating an inviscid (Euler equation) flow in CFX

  • 472 Views
  • Last Post 28 February 2019
admin posted this 27 September 2017

Is it possible to simulate an inviscid (Euler equation) flow in CFX?

Order By: Standard | Newest | Votes
Arun Kumar posted this 17 October 2017

By default, CFX solves for the Navier Stokes equations including viscous terms.The governing equations for inviscid flow, also known as Euler equations, are obtained by discarding the viscous terms from the Navier-Stokes equations. To do this: 1. Set a very low Dynamic Viscosity value, say, 1e-12 kg/m/s, 2. Activate the 'laminar' turbulence model option. 3. Set the 'Free Slip Wall' option at all walls.

chenpt09 posted this 28 February 2019

I tried this way(1,2 and 3) in CFX for an annular cascade flow, but it didn't give me the right streamline distributions on the endwall. So I used Fluent and got the right results.

Close