Meshing of a wing having very small trailing edge

  • Last Post 22 November 2018
  • Topic Is Solved
mstricks posted this 21 November 2018

I tried to mesh this geometry as given in the screenshot but it showed error. I do not know which setting i should used to mesh this geometry

dimension of trailing edge is 0.03mm


Order By: Standard | Newest | Votes
Aniket posted this 21 November 2018

  1. Turn off mesh defeaturing, currently mesher will remove any features below 0.3 mm
  2. Apply edge size on the trailing edge to capture it well.

  • Liked by
  • mstricks
mstricks posted this 22 November 2018


Sorry for late reply

Thanks Aniket my problem is solved as you have given meshing techniques