Meshing problem, I've tried a lot of ways to fix the error but nothing works, any suggestion to fix?

  • 105 Views
  • Last Post 25 June 2019
PedroP posted this 14 June 2019

Hello, I am having some problem in generating a mesh for a personal project. I tried to decrease the elements size, to do a multizone mesh, to change the smoothering, but nothing works, and the main problem here is in regard to the enclosure. I can't decrease more my elements size. Do you have any suggestion for the problem? The first error is from geometry and the second is the mesh. I also tried to mesh a raw geometry but there is the enclosure error yet... I attached the settings i've used (Multizone and Mesh) and the simplified geometry (despite having a lot of parts missing and raw geometry it's not complete).   Thanks in advance,   Pedro

Attached Files

Order By: Standard | Newest | Votes
rwoolhou posted this 17 June 2019

Please can you add the images into the text: staff are not allowed to download attachments. 

  • Liked by
  • PedroP
PedroP posted this 24 June 2019

 

The main error is the enclosure error, in the last ones photos I tried to simplify my model at maximum, but the error in the enclosure is still happening and I can't proceed to another stage. In the full model (not simplified) I have two parts with geometry errors, but I can get rid of this parts - if necessary - to proceed. I have also tried to decrease at 1 mm the elements size but it is the maximum, once the pc has 16GB of ram and SSD.

abenhadj posted this 25 June 2019

Please can you add the images into the text: staff are not allowed to download attachments / go to external links.

Best regards, Amine

Close