Missing name selection on boundary condition

  • 117 Views
  • Last Post 18 November 2018
  • Topic Is Solved
AsliAla posted this 07 November 2018

Hello, 

I am trying to analyze an airfoil as 2D. Meshing process was completed well. Then I made name selection for boundary inlet and airfoil wall. But when I go to the setup part, I could not see airfoil wall and boundary inlet on boundary conditons. Could you please help me?

Attached Files

Order By: Standard | Newest | Votes
rwoolhou posted this 07 November 2018

Which solver are you using? 

AsliAla posted this 07 November 2018

I am using Fluid Flow (Fluent)

rwoolhou posted this 07 November 2018

OK, they should transfer then. If you click on the named selected in Meshing have you got "transfer to solver" (or whatever it's called) set to yes?  

AsliAla posted this 07 November 2018

I got the message that said "The mesh translation to Fluent was successful. "

rwoolhou posted this 07 November 2018

That means the mesh is OK for Fluent. What surface labels have you got in Fluent?

kkanade posted this 12 November 2018

When you create named selection, please avoid to use spaces in the names. 

As Rob has already pointed out, please click on NS. Then check in its details - 'transfer to solver' is set to yes. 

In Fluent you would be able to see them in Set up - Boundary conditions. 

AsliAla posted this 18 November 2018

I put name selection on geometry section and my problem solved. Thank you for all your answers.

Close