How is step one step to perform an ODS (Operating Deflection Shape) with Ansys?

# ODS Operating Deflection Shape

- 132 Views
- Last Post 03 May 2018

ODS usually refers to taking accelerometer data at many points on a structure and using ODS software to map the accelerometer data to a very coarse representation of the geometry to visualize the vibration mode shapes and determine the frequencies of the structure.

ANSYS can simulate the vibration shapes of a structure that is subject to a harmonic excitation, it is called Harmonic Analysis. Here is my example of a bridge. A more typical example would be a machine with an out-of-balance rotor causing a harmonic load on the structure.

Please provide an image of a typical example you are interested in simulating. Do you have geometry for the structure?

I work with vibration analysis on rotating equipment, and I am learning about ODS, and I am also a beginner at Ansys.

I drew an engine and a base, but very basic, just to try to simulate Ansys, I set up a project with modal analysis and random vibration.

Is it possible to manually enter the data (vibration collected with the accelerometer) from the mapping?

If you fasten an accelerometer to the base of a structure and record a time history, you can apply that data as an acceleration load to the structure that is mounted on that base in a Transient Structural analysis.

If you compute the PSD from the accelerometer time-history data, you can input that PSD into a Random Vibration analysis.

You should also explore the Modal analysis and the Harmonic Response analysis for your sample structure.

If you are playing with SpaceClaim, try the Shell tool to hollow out a block to make a thin walled box.

##### Search

##### Categories

##### This Weeks High Earners

- peteroznewman 90
- SandeepMedikonda 84
- abenhadj 56
- Kremella 45
- Ananth Narayan 40
- rwoolhou 37
- HHK1992 22
- Kellen.traxel 18
- argenisbnl 17
- rgpatchi 16