Hello,
want to set up an parameter study for an geometry optimization with ANSYS Fluent. Therefore I use ANSYS Workbench 19.2 with Fluent for a transient coupled flow and heat transfer simulation with two solid materials and one fluid material. The transient simulation has some initial conditions (different temperatures in the three materials). In a normal study I apply the initial conditions via patching after the initialization.
When I then start a parameter set with different geometries, the next simulation starts with the results of the previous simulation instead of the initial conditions.
How can I apply the initial conditions for every design point in my parameter study?
Thank you in advance and kind regards,
Christopher