Parametric Study- Ansys Fluent

123 Views
Last Post 14 June 2019
Topic Is Solved

uk101 posted this 13 June 2019 - Last edited 13 June 2019

Hello,
I am doing parametric study on my pipe geometry with venturi inside, my goal was to find the throat diameter which give me atmospheric pressure (101325 Pa). My first simulation ran smoothly and the solution converged as well. But for the design points further, I gave different Throat diameters for which i am getting same Pressure value as for my first simulation.

Please have a look on the screen shot attached under.

https://drive.google.com/open?id=1NXtMIHJU2fT80eV1mQRGZR39zxCksovg

Can someone please suggest me anything?

#Permalink
0
0
0

4 Comments

Order By: Standard | Newest | Votes

ANSYS

rwoolhou posted this 13 June 2019

Please post images in with the text: staff are not allowed to open attachments.

Which version are you using?

#Permalink
0
0
0

uk101 posted this 14 June 2019

Thanks rwoolhou for your reply, I am using version 17.0 for Ansys workbench and its been installed in our University lab (probably Academic version).

#Permalink
0
0
0

ANSYS

rwoolhou posted this 14 June 2019

That'll be the Teaching version: simply it's the University equivalent to Student.

The problem was the convergence checking in that version: it's been fixed. The best solution is to update to the latest version (2019R2) which you want to be using anyway as R17 is about 4 years old.