Plot Force - Displacement

  • 162 Views
  • Last Post 01 August 2018
  • Topic Is Solved
mekafime posted this 26 July 2018

Hi,
Please, how I can get plot force (N) - displacement (mm)?
At any point.

Thanks

Order By: Standard | Newest | Votes
aramos posted this 26 July 2018

Hello,

You can use the chart to plot a force vs displacement.

help link: https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v191/wb_sim/ds_new_chart_table.html?q=mechanical%20chart

 

Under Solution folder in the tree, create the Force and Displacement results. Once evaluated, select both of them with Ctr key and create a new chart.

Use the detail view of the chart to edit the curves plotted and the axis of the chart.

 

Best Regards

SandeepMedikonda posted this 26 July 2018

Hi,

Indeed, as aramos pointed out, here is an article discussing this step by step.

Regards,

Sandeep

mekafime posted this 26 July 2018

Hi,

Thanks, but Force no mentioned, I think is Command APL.

SandeepMedikonda posted this 26 July 2018

Hi,

  Please see if this post helps?

Regards,

Sandeep

  • Liked by
  • mekafime
mekafime posted this 26 July 2018

Thanks, is very useful, but I need in another point, no boundary.

peteroznewman posted this 26 July 2018

Mekafime,

You might have more success making your plot if you provide some screen snapshots of your model or if you Attach a Workbench Project Archive so we can show you how to plot what you want. 

Regards,
Peter

mekafime posted this 30 July 2018

Hi,

In this point, I need plot Force vs displacement.

SandeepMedikonda posted this 30 July 2018

Hello,

In your force reaction, Change your location method to a geometry selection and select that vertex as shown below:

 

  • Liked by
  • mekafime
peteroznewman posted this 30 July 2018

Hi mekafime,

Here is an example:

I think what you need is for the chart to have several values to plot.  To do that, setup the Step Controls like this:

The setting shown will put 5 points on the chart.  Set the Minimum Substeps to 10 if you want 10 points on the chart.

  • Liked by
  • mekafime
mekafime posted this 01 August 2018

Thanks so much ! 

Close