Greetings to all. I have version 19.2 of ansys student installed. I am presenting the problem "The geometry editor was closed abnormally". How can I solve this, because this does not allow to continue with the normal workflow when using SpaceClaim. Thank you first.
SpaceClaim - The geometry editor was closed abnormally.
- 1.3K Views
- Last Post 1 weeks ago
- Topic Is Solved
Please try the instructions here
Hi good day. I come from that thread, make the raisins that you indicate, my problem persists.
Please post the screenshot of the value of
it is ok? PD:
By the way. My pc is in spanish because i'm from venezuela. At the default value says (value without assigning)
On the 'Data' column for the 'Path' , is it
C:\Program Files\ANSYS Inc\ANSYS Student\v192\scdm
C:\Program Files\ANSYS Inc\ANSYS Student\v192\SCDM
Also, check with the Windows File Explorer and make sure that that path exists.
Good evening, if the route is correct and the address in the browser also exists. I do not know what happens
Open CMD Prompt, then issue this command (with quote " " )
"C:\Program Files\ANSYS Inc\ANSYS Student\v192\scdm\SpaceClaim.exe"
Does this launch stand-alone SpaceClaim ?
If so, issue the command
and post the output here
Good day, yes, the command launches the program without problems ..
ok, so after this, in the CMD Prompt, could you type
then press 'enter' and show the output of it ?
Open elevated (Administrator) CMD Prompt (right click on CMD and 'run as administrator'), then issue the following command
"C:\Program Files\ANSYS Inc\ANSYS Student\v192\Framework\bin\Win64\runwb2.exe"
Can you launch SpaceClaim from this Workbench session?
The same message "the geometry editor was closed abnormally". I can´t understad this problem. T-T. There is not solution??
Sorry , I'm running out of idea. I will ask other folks to look and see if they have other thoughts
In the meantime, since one of the most common causes of issue we've seen in this forum is localization, can you try
- Create a test Windows user account with the name that doesn't have underscore ' _ ' , like abc, or a123.
- Make sure your system is using English language as default , ref : https://us.answers.acer.com/app/answers/detail/a_id/45924/~/change-the-operating-system-language-on-acer-windows-10-computers
As I understand. RaguShiva was able to solve the problem, but he does not connect to the forum since then, I will try to change the default language..
I try to change the pc language and error persists. It is as if the plugin that integrates into the SpaceClaim workbench will not be configured. If you have some ideas from other colleagues, what I have seen is an error that happens frequently.
I'm still asking around for any thoughts on this issue.
Just to verify, have you also tried creating a dummy username with simple english letters or numbers ?
Also, just for a kick, Go to HKEY_CLASSES_ROOT\SpaceClaim.AnsysSCDM.192 again and remove/delete the 'Path' , close the registry editor, then open up an elevated CMD Prompt and issue the following command (this is one line)
reg add HKEY_CLASSES_ROOT\SpaceClaim.AnsysSCDM.192 /v Path /t Reg_Sz /d "C:\Program Files\ANSYS Inc\ANSYS Student\v192\scdm" /f
Does this make any difference ?
Try it in the main account, change the language and then your last suggestion.
- All Categories
- Community Rules, Guidelines, and Tips
- News & Announcements
- Student Products
- Pre and Post Processing
- Physics Simulation
- Tutorials, Articles and Textbooks
- Installation and Licensing
- Student Competition Teams
- eMasters Degree from UPM
- Site Feedback